TRENDnet 54Mbps Wireless G PoE Access Point TEW-434APB (Version A1.0R) Specs

| Wireless Driver & Software

TEW-434APB Wireless PoE Access Point is today’s link to Wireless Technology. Compliant with the IEEE Wireless Networking Standard 802.11g, it provides Direct Sequence Spread Spectrum (DSSS) operation for transparent bridging and roaming capabilities for wireless nodes. The TEW-434APB also provides WDS bridging functions, allowing users to connect two or more Access Points together, wirelessly. With this Wireless Access Point and Wireless Network Adapters, users can connect to Ethernet/Fast Ethernet LAN at home or office to access network resources with coverage up to 300 meters.

Hardware Standards IEEE 802.11b/g (Wireless LAN)IEEE 802.3u (Fast Ethernet); IEEE 802.3af PoE Media Connector 10/100Mbps, Half/Full Duplex LED Indicators WLAN, LAN Power 7.5V DC, 1A External Power Adapter 48V DC from PoE source via Ethernet Port Dimensions 150 x 110 x 30 mm (5.9 x 4.3 x 1.2 inches) (without antenna) Weight 226g. (8 oz.) Temperature Operating: -0° ~ 40°C (32° ~104°F); Storage: -25° ~ 70°C (-13° ~ 158°F) Humidity Max. 90% (non-condensing) Certifications CE, FCC Wireless Frequency Range 2.412 ~ 2.484 GHz Modulation 802.11b: DSSS 802.11g: DBPSK/DQPSK/CCK/OFDM Protocol CSMA/CA with ACK Data Rate (Auto Fallback) 802.11b: 11, 5.5, 2 and 1Mbps 802.11g: 54, 48, 36, 24, 18, 12, 9 and 6Mbps Operating Modes AP, AP Client, WDS, AP+WDS or Repeater Modes Channel 1~ 11 Channels (US) 1~13 Channels (EU) Security 64/128-Bit WEP (Hex/ASCII), WPA/WPA2 (802.1x) WPA-PSK/WPA2-PSK MAC Address Filter, SSID Broadcasting Control Antenna 1 x 2dBi Detachable Diversity Antennas with Female Reverse SMA Connector Output Power 13 dBm (min) Transmit Power 802.11b: 18dBm (typically) 802.11g: 15dBm (typically) Receiving Sensitivity 11Mbps 8% PER @ -78dBm (typical) 54Mbps 10% PER @ -68dBm (typical)